SA533GrBCL2 nuclear steel, SA533GrBCL2 corresponding material, SA533GrBCL2 steel plate fixed rolling

SA533GrBCL2 nuclear steel, SA533GrBCL2 corresponding material, SA533GrBCL2 steel plate fixed rolling

SA533GrBCL2 heat treatment: The steel plate should be heat treated, heated to a suitable temperature in the range of 1550-1800 °F (845-980 °C), holding for a long enough time to make the temperature uniform over the entire thickness of the plate, and then quenched in water. This is followed by tempering at a suitable temperature to produce the specified performance, but the tempering temperature should not be lower than 1100°F (595°C) and the holding time should be at least 1/2h/in. (1.2min/mm) thickness, but not less than 1/2h.

SA533GrBCL2 Fixed rolling: Wugang Xiangyang

SA533GrBCL2 steel plate implementation standard: implementation ASMESA533/SA-533M standard.

SA533GrBCL2 Chemical Composition:

C:0.25; Mn:1.15-1.50;Mo:0.45-0.60;Ni:0.40-0.70;Si:0.15-0.40;P:0.012;S:0.015;Cu:0.10;V:0.01

SA533GrBCL2 mechanical properties:

yield strength:≥

Tensile strength: 620-795

Elongation %: ≥16

18MnD5 was originally a steel grade in French RCC-M2000, corresponding to the American standard ASME grade SA533GrBCL2, which is mainly used for making evaporators, voltage regulators, Pressure vessel cylinder and head, support member.

18MnD5|16MnD5 steel plate rolling process description:

raw material scrap iron and raw steel→ electric furnace 90 or 100 tons arc → LF furnace molten steel polishing→ ladle vacuum treatment VD or VOD → die casting/continuous casting→ large slab electroslag heavy furnace → heating continuous and soaking furnace → steel plate rolling 4100 and 4200mm rolling mill → flaw detection Heat treatment of steel plates→ quality inspection of steel plates